Nissan's Beginnings

Japan first imported automobiles from Europe and the United States in the late 19th century. Only foreign brands such as Ford and GM were seen on Japan's roads in the Meiji (1868–1912) and Taisho (1912–1926) eras.

Momentum began for manufacturing cars in Japan began to build in the early 20th century and daring entrepreneurs laid the foundations of the nation's automobile industry. The Kwaishinsha Motor Car Works was established in 1911 in the Hiroo district of Tokyo. It was a small workshop, but founder Masujiro Hashimoto had big dreams. Just three years later, Kwaishinsha built the DAT, a small passenger car powered by a twin-cylinder 10ps engine that could hit 32 km/h.

In 1928, exceptional entrepreneur Yoshisuke Aikawa became president of Nihon Sangyo Co. Ltd., the company from which the name Nissan originated. His knowledge of the automotive scene in the United States convinced him cars would become popular in Japan as well.

Only foreign cars from Ford and GM (General Motors) were seen on Japan's roads in the Meiji and Taisho eras. At that time, men like Yoshisuke Aikawa had zealously begun manufacturing vehicles. They are the ones who built the foundation of Japan's automobile industry of today.

1910's

1910
Yoshisuke Aikawa establishes Tobata Casting Co., Ltd.

Yoshisuke Aikawa was born in Yamaguchi prefecture. He graduated from Tokyo Imperial University (present Tokyo University). When he lived in the United States, Yoshisuke concealed his academic accomplishments and worked in a factory, where he developed casting skill. He established Tobata Casting Co., Ltd., after his return to Japan.

Yoshisuke Aikawa

Yoshisuke Aikawa

Datsun Fayton 12

Datsun Fayton 12

Yoshisuke Aikawa in the United States

Yoshisuke Aikawa in the United States

1911
Establishment of The Kwaishinsha Motor Car Works

Masujiro Hashimoto led by establishing Kwaishinsha. The factory embarked on domestic automobile production, which became the forerunner of the domestic automobile industry.

Masujiro Hashimoto

Masujiro Hashimoto

1914
Complete manufacturing of the DAT car

The DAT car was named by combining the initials of three men who invested in Kwaishinsha: Den, Aoyama and Takeuchi. The DAT car was entered in the Taisho Exposition held in the same year.

Kenjiro Den

Kenjiro Den

Rokuro Aoyama

Rokuro Aoyama

Aketaro Takeuchi

Aketaro Takeuchi

Off-line of the DAT car

Off-line of the DAT car

1918
Starts anew under the name Kwaishinsha Motor Car Co., Ltd.

The Kwaishinsha Motor Car Works grew in size to 600 thousand yen in capital, with 60 employees. They completed and released Model 41 DAT in the following year, mounting the first single body casting 4-cylinder engine in Japan.

Kwaishinsha Factory

Kwaishinsha Factory

DAT-41 passenger car

DAT-41 passenger car

1919
Establishment of Jitsuyo Jidosha Seizo Co., Ltd.

William R. Gorham, an American engineer, developed a three-wheeled vehicle in 1919. This drew attention from a businessman in Osaka, who established Jitsuyo Jidosha Co., Ltd.. The mechanical equipment, auto parts, and materials were ordered and imported from the United States.
Jitsuyo Jidosha Co. was a modern automobile factory of the time.

Mr. Gorham (on the right) and tricar

Mr. Gorham (on the right) and tricar

1920's

1925
Establishment of DAT Jidosha & Co., Ltd.

Kwaishinsha established DAT Jidosha & Co., Ltd. for the purpose of strengthening sales.

1926
Establishment of DAT Jidosha Seizo Co., Ltd.

Jitsuyo Jidosha Seizo Co., Ltd. became DAT Jidosha Seizo Co., Ltd. and merged with DAT Jidosha Trading Company.

1930's

1931
DAT Jidosha Seizo Co., Ltd. becomes affiliated with Tobata Casting Co., Ltd.

Tobata Casting Co., Ltd., who was manufacturing the automobile parts, planned to advance to the automobile industry and received DAT Jidosha Seizo to be affiliated under them.

1932
The birth of DAT SUN

In 1931, DAT Jidosha Seizo Co., Ltd. became a subsidiary of Tobata Casting Co., Ltd., and developed its first 495cc compact size passenger vehicle. In the following year, 1932, the company changed its name to Datsun: DAT was taken from the initial letters of three men. The SON was changed to SUN, since the SON sounded the same as a word meaning "disadvantage" in Japanese.

Brochure cover of the 1932 DATSON

Brochure cover of the 1932 DATSON

1933
Tobata Casting Co., Ltd establishes Automobile Division

Tobata Casting Co., Ltd. set up an Automobile Division in March 1933 and began automobile production in earnest. In October of the same year, the company purchased more than 66,000m2, of reclaimed land in Shinkoyasu on the coast in Yokohama City (the site where the present Yokohama Plant is located).

Established Jidosha Seizo Co., Ltd. in Yokohama.

Yoshisuke Aikawa's two holding companies, Nihon Sangyo and Tobata Casting, which he also established, invested in and established Jidosha Seizo Co., Ltd. on December 26.

Inside of the Tobata Casting Factory

Inside of the Tobata Casting Factory

1934
Corporate name changes to Nissan Co., Ltd.

The corporate name was changed to Nissan Motor Co., Ltd when Nihon Sangyo Co., Ltd become the 100% investor of the general meeting of stockholders in June.